Safety Carbon Monoxide Detector Alarm
New Safety Carbon Monoxide Alarm Detector is the perfect gadget to protect you and your family from the dangers of carbon monoxide.
With this advanced level of protection, you will be informed of the presence of carbon monoxide in only 3 minutes!
No need to worry, the display shines bright blue light and it will be easy to see the numbers without a struggle.
To keep you sure that the detector is working properly, it will shine green every 30 seconds.
When there is a danger, the detector will become red and loud beeping will sound to warn you.
The detector works on 3AAA batteries that are easily replaceable, and it will serve you for ages!
- Sensitivity/Alarm Time: Within 60~90 minutes at 50ppm CO concentration; Within 10~40 minutes at 100ppm CO concentration; Within 3 minutes at 300ppm CO concentration.
- LCD Displayer (optional): 4 digits LCD displayer.
- Audibility: 85dB ( at 1m distance ), Frequency 3 - 0.5KHZ.
- Standby Current: <50μA.
- Alarm Current: <50mA.
- Standby Mode: Green Led flashes once every 30 seconds.
- Alarm Mode : Red Led quickly flashes 4 times with unit chirping every 5 seconds and then repeat.
Low-bat Indicator: Chirp every 30s as battery lower than 3.3V with green LED flashing and Lb on LCD.
- Chirp every 30s with green LED out and Err on LCD.
- Power consumption: 0.3mW.
- Size: 10 x 4cm.
- Powered By: 3 x AA Batteries (Not included).
- A perfect item for protecting your family from the dangers of carbon monoxide.
- Advanced level of protection, easy to read with the digital display, even in low light conditions.
- Displays the level of carbon monoxide the unit is sensing.
- Green LED: Flashes every 30 seconds to indicate the unit is operating properly. The green LED will also flash before CO reading is taken and when any button is pressed.
- Red LED : When a dangerous level of carbon monoxide is detected the red LED will pulse and a loud alarm pattern will sound. The carbon monoxide alarm pattern is 4 short beeps, followed by 5
seconds of silence, followed by 4 short beeps with a corresponding red LED flash. This cycle will continue for 4 minutes and then change to 1 cycle every minute until the device is reset or the CO is eliminated.
- Test/Reset button is designed for weekly testing if it works properly and reset the unit during CO alarm.
- Alerts users when batteries needs to be replaced.
- This alarm is highly recommended to be mounted on a wall surface.
Compact, lightweight & easy to operate.
We have a LIMITED supply in stock. Get yours NOW.
May take 15-28 days to arrive due to high demand.
Please "Add to Cart" NOW.
At TigerShore, we truly offer the most stunning, trendy highest-quality products in the world.
We will do WHATEVER it takes with outstanding customer service support to assist everyone as we highly value our customer satisfaction with absolute ZERO risk.
We make sure that every customer is 110% satisfied in every aspect with 24/7/365 FAST SUPPORT!
Active shoppers on site